[Online Course] GETTING STARTED WITH GNS3

[grr]

GETTING STARTED WITH GNS3


DURATION
5hr 26min

RELEASE DATE
March 15, 2016

Course Description

This course is designed for those who have no previous experience with GNS3 and wish to learn how to utilize GNS3 to create Cisco networking topologies for Cisco Certification preparation, or just for fun. In this course you will learn how to download the GNS3 application (version 1.4.4) and view a demonstration of the installation process. After installing the product on a Windows-based laptop, you will learn about the various toolbars and screen layout of GNS3. GNS3 nodes will be discussed (such as routers, Ethernet Switches, Etherswitch Routers, Frame-Relay Switches, and more) and you’ll see several live examples of how to build network topologies with these devices. The course will culminate with one or more CCNA Example Labs (time permitting) that describe a lab objective and topology, which will subsequently be built from the ground-up so you can view a real, working example of using GNS3 for Cisco Certification preparation, and even replicate this same lab within your own GNS3 environment for practice.

Course Outline

An Introduction to GNS32 Videos
GNS3 Course Introduction
A "Simulator" or an "Emulator"?

Selecting a Cisco IOS image3 Videos
Cisco Platform Considerations
Feature Sets
Memory Considerations

GNS3 Download and Installation6 Videos
Locating and Downloading GNS3
The GNS3 Setup Wizard :: Part 1
The GNS3 Setup Wizard :: Part 2
Projects, Topologies & Nodes
Device Toolbar & Workspace :: Part 1
Device Toolbar and Workspace :: Part 2

Implementing Switching with GNS33 Videos
Built-In Ethernet Switch Node
EtherSwitch Router
Connecting Your GNS3 Topology to an External Switch

Using Built-In GNS3 Nodes3 Videos
Built-In Hub Node
Built-In Frame-Relay Switch Node
Using the VPCS Node

Using Wireshark within GNS31 Video
Using Wireshark within GNS3

GNS3 Snapshots1 Video
Using GNS3 Snapshots

Terminal Emulators1 Video
Changing your Terminal Emulator within GNS3

GNS3 CCNA Example Labs: EIGRP6 Videos
EIGRP: Lab Overview, Objectives & Topology
EIGRP: Part 1 :: Building the Physical Topology
EIGRP: Part 2 :: Adding IP Addresses
EIGRP: Part 3 :: Configuring Basic EIGRP
EIGRP: Part 4 :: Adding EIGRP Authentication
EIGRP: Part 5 :: Manipulating EIGRP Path Selection

GNS3 CCNA Example Labs: Switching5 Videos
Switching: Lab Overview, Objectives & Topology
Switching: Part 1 :: Building the Physical Topology
Switching: Part 2 :: Adding IP Addresses and Static Routes
Switching: Part 3 :: Configuring VTP and VLANs
Switching: Part 4 :: Modifying Spanning-Tree

Get it HERE